Random good picture Not show

61. The results showed that the compound could improve the scorch safety, the compression set and the tensile strength of fluororubber compound.

62. Bolting mechanical properties are tested by the tensile strength tester, impact tester and hardness testers, to guarantee the detect precision.

63. Tensile strength of sample special vehicle ZL205A aluminum alloy wheels made by counter pressure casting is with no heat crack, loosen or other defects.

64. If a label backing sheet in less area tensile strength wouldn't be too large.

65. Specific strength . The ratio of tensile strength to specific gravity for a material.

66. As the vibration pressure amplitude increases, the impact strength and the tensile strength of the samples increase simultaneous. The structure of the samples were investigated by SEM, WAXD.

67. The inclusion of polyamide and alkyl ketene dimmer improved the mechanical properties of methylcellulose, especially the wet tensile strength. Testing of biodegradation activity showed that both St.

68. Furthermore, the paper also analyses the statistical parameter of axial compressive strength and axial tensile strength, give the standard value of each strength.

69. Tensile strength of the ethylamine ionomer increased with the sulfonate content increasing.

70. At neutral, oxidizing atmosphere, the long-term use can still maintain good tensile strength, toughness and fiber structure.

71. It is shown that the ultimate tensile strength (UTS) torsion failure life (TEL) and reverse bending failure life (RBFL) are decreased obviously as the consequences of the zincing.

72. Perform routine physical chemistry testing, e . g. particle analysis, tensile strength, extensibility, MVP , absorption, purified water monitoring.

73. The tensile strength is low and wear property is poor when perform preheated temperature is low and pouring temperature is high.

74. A linear relation between shrinkage also tensile Strength and the function of amorphous orientation state, ( 1 - Xc ) fam , was founded.

75. The cross section area was decreased due to corrosion attack in decarburized region, resulting in the tensile strength reduction.

76. Compared with raw material, the cup formed by the technology of warm forming has perfect metal flow lines and the body's hardness and tensile strength are g...

77. I produced polyisoprene latex, no proteins, no solvent, no ammonia odor, safety and environmental protection, and mechanical stability, high chemical stability, high tensile strength.

78. Michael : Ever hear of tensile strength? Hooke's Law of Elasticity?

79. Experimental results indicated that the impact and tensile strength of this vulcanized blends all higher blends.

80. In addition, photo-set block copolymer and IPN system, with regular microphase domain structure[sentencedict.com], have higher tensile strength and elongation at break than those of heat-set polymers.

81. Cytoskeletal intermediate filaments appear to impart tensile strength to the cell cytoplasm.

82. The tensile strength, heat resistance and processability of the system decrease slightly with the increase of superfine wollastonite amount.

83. They used collagen, a protein of great tensile strength and ideal as "scaffolding" for tissue growth, to hold the valve tissue in shape as it grew into one-inch disc-shaped valves.

84. The poor compatibility of HGB with composite materials resulted in lower figures of the tensile strength, flexural strength and impact strength after adding HGB.

85. The tensile strength, impact strength, flexural strength, thermal properties and morphology of the composites were investigated.

86. Hydroxyapatite(HA) whisker has lower dislocation density and higher tensile strength, therefore it could be used as toughening material in bioceramic.

87. Through the assumed moving direction of the plow chain, the maximum pull point is determined, the tensile strength of the plow chain is checked, the safe coefficient of the plow chain is obtained.

88. The result demonstrates that the roughness of old concrete and adhesive agent have important influence on bond splitting tensile strength.

89. The research shows that the repeated loading on the bag makes the molecular chain cut off and the tensile strength reduced.

90. Tensile strength corresponds to the maximum tensile stress that may be sustained by a specimen.